X3 questions

First off sorry to make another thread i just don't want this not to be seen.

First off I'm very confused by these dip switches. The only way the xbox boots at all is with the first one on and the rest off. Otherwise it hangs at a black screen. Bios 3294 boots to the x3 live config in switch one on. Do I need to worry about any of this? Just every guide says use on on off off. If I do that nothing happens. No other combinations do anything either

Second high definition will not work at all no matter what I do or where I enable the settings. X3 live is set to enable 720p, as is xbmc, and original is dash. They all stay that way on reboot but it still doesn't display in hd. Looks terrible.

3rd when my xbox is booting shortly before the xecuter rox my box pops up the screen freezes and jitters then continues. It makes a horrible noise but then seems to start fine. All apps and games seem to work just no hd.

This is a 1.0 xbox. Didn't notice the jittering with the screen when starting until after I removed the clock capacitor. Also I am using a 500gb hard drive from a different hard modded xbox that was using an x2 bios. Is that a problem.

For hd do I need to use an hd pack or something? I have an arsenal xbox hd pack that came with this but not component cables to plug into it to test it. I just am using regular xbox component cables plugged into the back of the xbox directly.

Submitted by Myhearthergain | #Specialdealer Special Offer Online Shopping Store 2016