Component video ghosting/ringing from Xbox360?

Hey everyone!

Before anyone asks this is a required use case for component video and I can not just use HDMI. This is for a videowall style setup.

Also I am a Commercial AV design engineer & project manager, but my analog video skills are a bit rusty.

I am using a 360 outputting via component cables (I'm using some very decent looking Rocketfish cables) but for some reason on my LCD TV I am getting similar video ghosting to this image - http://i.imgur.com/1gFIFNj.jpg

I do NOT get any of this ghosting when using the Xbox in 720p/1080i on my Sony BVM-D24 broadcast monitor, but get the ghosting not only on the TV but my Datapath Vision AV capture card via component. This happens at every resolution capable by the 360 and does not seem to change anything. Again this does NOT happen on my BVM broadcast monitor but only on the LCD and capture card.

Let me know if you have any suggestions! I will test with the OEM cable once it comes in the mail. The only thing I can think of is that the TV/capture card isn't terminating the signal properly as the BVM with a properly 75ohm terminated input card is fine, but it makes me wonder what the issue could be if it is happening on the Datapath frame capture as well.

I also tried going through the service menu of my Sony LCD TV and they don't give you LCD driver settings anymore! So I can't really mess with the RGB sync or anything of that nature.

Thanks in advance!

Submitted by furntree | #Specialdealer Special Offer Online Shopping Store 2016